• Extruded Aluminum I Beam for Helideck
  • Extruded Aluminum I Beam for Helideck
  • Extruded Aluminum I Beam for Helideck
  • Extruded Aluminum I Beam for Helideck
  • Extruded Aluminum I Beam for Helideck
  • Extruded Aluminum I Beam for Helideck

Extruded Aluminum I Beam for Helideck

After-sales Service: Local Dealer
Warranty: One Year
Type: Window & Door Aluminium Profile, Decoration Aluminium Profile, Heat Sink Aluminium Profile, Glass Wall Aluminium Profile, Transport Aluminium Profile, Dome
Shape: I Type
Grade: 6000 Series
Temper: T3-T8
Customization:

Contact Supplier

Mr. Edward. Z
Sales & Marketing Director
Gold Member Since 2016

Suppliers with verified business licenses

Trading Company

Basic Info.

Model NO.
aluminum dome extrusion
Alloy
Alloy
Surface Finishing
Polished
Alloying Ingredient
6061
Certification
ISO
Polished Aluminum Profile
Mechanical Polishing
Max Width
600mm
Max Length
30m
Yield Strength
210MPa
Tensile Strength
270MPa
Transport Package
by Air Cushion
Specification
according to the drawings
Trademark
abelly
Origin
China
Production Capacity
20000tons

Product Description

The dome beams are extruded 6061-T6 or 6005A-T6 aluminum alloy. 6061-T6 and 6005A-T6 have the same minimum strength properties. 6005A-T6 is a relatively new alloy that has some advantages over 6061-T6. The main advantages are a better finish, less sensitive timeframe to quench after extruding, and its ability to be air quenched instead of water quenched for most extrusion sizes. Finally, it costs a little less, mainly due to the easier quenching process for the extruder. The protrusion on the top of the beam must be milled or cut back to allow the beam to bolt to the connection hub. 

This aluminum dome beam extrusion is typical. Note the protrusions on the top. The protrusions are the attachments for the dome panels and batten bar. The batten bar holds the dome panels in place and is attached by a ¼" tri-lobe screw in the slot at the center of the beam. The flange stiffeners at the end of each flange are typical for a thin-wall beam extrusion. The flange stiffeners increase the allowable compression and bending in a thin-wall shape by about 20-25%. They also increase the weak-axis moment of inertia, section modulus and radius of gyration without increasing the width of the beam. They are not needed on thicker shapes. 
Extruded Aluminum I Beam for Helideck
Extruded Aluminum I Beam for Helideck
 
Extruded Aluminum I Beam for Helideck
Extruded Aluminum I Beam for Helideck

 

Send your message to this supplier

*From:
*To:
avatar Mr. Edward. Z
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now